FVS336G CASE STUDY

This chapter contains the following sections: The IP address of the initiating device for this log entry. You must manually restart the VPN firewall in order for the default settings to take effect. The current status of the SA. DHCP enabled or disabled.

To monitor the status of the WAN ports:. The scan will detect active devices that are not DHCP clients. When the Test light turns off, wait a few more seconds before continuing. The local network is scanned using standard methods such as ARP. In the When limit is reached section, make the following choice:.

fvs336g case study

This is the Account Name that you entered in the Basic Settings page. Each PC or device must be in a single group. No Authentication is selected by default.

Univex ProSafe FVSG. Upgrading the Firmware. Page 10

After the VPN firewall has rebooted, check the firmware version in the Router Status screen to verify that your router now has the new firmware installed. The Logs screen is displayed. The Time Zone screen is displayed.

When the Port Triggering screen is displayed, click the Status link to the right stud the tab to display the Port Triggering Status. Locate the downloaded file and click upload. Then enter the user name and password to be used for authentication. The time remaining before this rule is released and made available for other.

  ESSAY REFLEKSION ERINDRING

Univex ProSafe FVS336G User Manual

The Group column indicates which. For each PC or device, the following data is displayed Table Incoming traffic using one. In some cases, such as a major upgrade, it may be necessary to erase the configuration and manually reconfigure your VPN firewall after upgrading it.

fvs336g case study

The Active Users screen is displayed. Click Yes to enable SysLogs and send messages fve336g the syslog server, then: In the System Logs section, select the type of system events to be logged. Selecting all events studyy increase the size of the log, so it is good practice to select only those events which are required To configure logging and notifications: For each PC or device, the following data is displayed.

In the When limit is reached section, make the following choice: This will change if you upgrade.

fvs336g case study

The scan will detect active devices that are not DHCP clients. Check Yes to enable E-mail Logs. PCs and other LAN devices become known by the following methods:. If you don’t have e-mail notification enabled, you can view the logs by clicking the View Logs option arrow to the right of the tab. If you select this option and leave either the Server 1 or Server 2 fields empty, they will be set to the default Netgear NTP servers.

  SHOW MY HOMEWORK TRINITY SCHOOL TEIGNMOUTH

Selecting all events will increase the size of the log, so it is good practice to select only those events which are required.

If your ISP charges by traffic volume over a given period of time, or if you want to study traffic types over a period of time, you can activate the Traffic Meter for one or both WAN ports. The specified restrictions will be applied to the incoming traffic only.

The IPsec Connection Status screen is displayed. In the Fv3s36g limit is reached section, make the following choice:. Firmware Version This is the current software the router is using.

Netgear ProSafe Dual WAN Gigabit Firewall w SSL IPSEC VPN FVSG EUS Networks Routers

If you have not enabled the Traffic Meter, these statistics are not available. Click Refresh Log to retrieve the latest update; click Clear Log to delete all entries. Enter an e-mail address to appear as the sender. Only E-mail traffic will be allowed.

Traffic counters are updated in MBytes scale; the counter starts only when traffic passed is at least 1MB.

Author: admin